UN1320: Dinitrophenol, wetted
As listed: Dinitrophenol, wetted with not less than 15 percent water, by mass
UN1320 appears 1 time in the Hazardous Materials Table (49 CFR §172.101). Hazard class 4.1, packing group I.
All §172.101 entries for UN1320
| Proper shipping name | Class | PG | Labels |
|---|---|---|---|
| Dinitrophenol, wetted with not less than 15 percent water, by mass | 4.1 | I | 4.1, 6.1 |
Open any entry for packaging sections, special provisions, air limits and vessel stowage.
What it means
Packing group ranks danger within the class: PG I = great danger.
Label codes (column 6): 4.1, 6.1 → Flammable solid label + subsidiary Poison / Toxic label.
UN numbers are recognized for international and domestic transport.
Example basic description
Proper shipping name shown without the table's italic descriptive text. Order per §172.202: ID number, proper shipping name, hazard class, packing group. Example only — add technical names, “RQ”, quantities and other elements your shipment requires.
What to check next
- Match the name. Compare your SDS Section 14 to the proper shipping names above and pick the row with your packing group.
- Read the special provisions on the entry page (§172.102) — they can add limits or exceptions.
- Check packaging — the entry page lists the Part 173 sections for exceptions, non-bulk and bulk.
- Labels & placards. Placarding depends on class and quantity — see Table 1 vs Table 2.
- Emergency response. Find the response guide for UN1320 in the current PHMSA Emergency Response Guidebook.
Get the HazmatTable Field Guide poster pack
8 printable hazmat reference posters — reading a table entry, hazard classes, placards, segregation, shipping papers and more. Free, sent to your inbox.
Common questions about UN1320
What is UN1320?
UN1320 is the identification number for Dinitrophenol, wetted in the DOT Hazardous Materials Table (49 CFR §172.101).
What hazard class is UN1320?
UN1320 is listed under hazard class 4.1 (flammable solid).
What packing group is UN1320?
Packing group for UN1320: I. Where several rows exist, the packing group that fits your material decides which row applies.